How to restore the drying shrinkage of insoles ？
There are four ways to restore to the original state:
1. You can try a steam iron to iron it, and the effect is very good.
2. Soak it in hot water overnight, it will be restored to its original state, just let it dry.
3. Put the insole into the shoe and you can recover after two days of wearing it.
4. Stuff foam plastic into the shoes, stuff them up to the original level, and then soak them with hot water. Finally, dry the shoes in the shade (attached to the foam).
Sports insoles are mainly shoe material products with unique characteristics in terms of elasticity, sweat absorption, shock absorption, comfort, etc., which are more suitable for the physical properties of shoe materials used in sports shoes.
Extended information
Precautions for sports shoes maintenance:
1. When the shoes are dirty, you can use clean water dipped in detergent to gently scrub, then rinse with clean water, and place it in a cool, ventilated, air-dried manner, and avoid direct sunlight. Do not use heating or open flame to dry, so as to avoid aging, cracking, fading and serious deformation. Excessive direct sunlight, heat from a hair dryer, and improper care methods can all reduce the life of the shoes; do not soak for a long time when washing, and generally the soaking time should not exceed 20 minutes. Leather shoes should not be soaked in water;
2. Most of the raw materials of sports shoes are synthetic polymer materials (mostly polyester nylon mesh and non-woven artificial leather, and the soles are mostly made of rubber or rubber foam). Some uppers are made of leather, so avoid contact with organic Reagents and grease solutions are also not suitable for long-term wear in high temperature environments. Generally, the wearing or washing temperature should not be higher than 45 degrees Celsius;
3. If it is stored for a long time, the shoes should be scrubbed clean first, and then stored in a cool and ventilated place after drying, so that the shoes have sufficient time to blow dry to avoid mildew. For leather shoes, it is best to use paper balls or shoe holders inside the shoes to avoid serious deformation. Place the toe head down and the sole facing the wall, and dry it in a ventilated place at room temperature. This will prevent water from entering the foam material in the midsole; (Because the foam material is not easy to dry, it is recommended not to lay wet shoes flat.)
4. In order to use sports shoes for a more beautiful appearance, do not use excessively hard brushes or excessive force during wearing or scrubbing, and do not use nails or sharp tools to pick the corners of these printed patterns. After wearing for a period of time, some small cracks may appear on the surface of some patterns (especially the parts that are often tortuous), which are all normal phenomena;
5. In order to achieve a satisfactory wearing effect, please treat your shoes fairly. Remember not to wear ordinary jogging shoes or walking shoes for strenuous sports such as football.
6. For athletes who train every day, it is best to prepare more than two pairs of sports shoes so that they can be replaced every day;
7. Athletes or sports enthusiasts should always wear the sports shoes they purchase. In order to prolong the life of the shoes, wash as little as possible;
8. The nylon mesh cloth and artificial tanned leather on running shoes are relatively easy to maintain, and can be washed by hand, preferably not in a washing machine or soaked in water;
9. Separate the shoes and shoelaces and wash them with neutral soap/powder water. When washing shoes, take out the insoles, gently scrub with a soft brush, and finally rinse them off;
learn more Insoles and orthotics , please kindly to visit our web .www.aideastep.com & www.ideastepinsole.com.
Also any other questions or suggestion , please feel free to contact us :
Tel: +86-18106960586（whatsapp）丨 Email: sales5@ideastepinsole.com /
Xiamen Kon Technology Co., Ltd